An official website of the United States government
Here's how you know
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

Home : News : Article View
NEWS | Oct. 23, 2023

Connecticut Guard Engineers Build Holding Area for Detainees

By Sgt. Matthew Lucibello, 130th Public Affairs Detachment

FORT DRUM, N.Y. - Soldiers push deep into enemy lines, collecting enemy prisoners of war as they go. The military police detain them and provide security, but where are they housed? As per the Geneva Convention, it is our responsibility to feed them, give them water and provide shelter. While MPs can handle those first two duties, building a facility where prisoners can stay … that’s a job for engineers from the 248th Engineer Company (Combat Support Company).

The 248th, based out of Norwich, Connecticut, is responsible for horizontal and vertical construction. During war, these engineers use their machinery to remodel the terrain to create fighting positions for protecting Soldiers and their vehicles. They also construct fortifications or other structures, like guard towers on forward operating bases. 

However, for this annual training, they constructed a detainee holding area (DHA) to provide shelter and humane living conditions for enemy prisoners of war. These facilities are typically found behind the front line and must conform to the Geneva Convention. 

“It’s supposed to be able to hold five to 10 prisoners in a field environment, keep them safe, keep them out of harm’s way,” explained Capt. Nathan Caso, commander of the 248th Engineer Company. “Having electricity, running water, those are some basic necessities for living in a prison environment [that enemy prisoners of war] are going to be in for some amount of time (until they are moved to a more secure facility).”

Constructing this facility started long before the 248th arrived at Fort Drum. 

Caso said the 192nd Engineer Battalion and 192nd Military Police Battalion, supervised by the 143rd Regional Support Group, collaborated to develop a construction plan that kept material costs low while meeting legal requirements.

The plan called for the facility to be modular, making it easy to assemble, transport and disassemble. 

“Our fourth platoon, in combination with the MP's vertical construction section, prefabricated most of this in Connecticut, in Norwich, right in our armory,” said Caso. “So all we had to do when we got on the ground was assemble it.”

To get the sections to Fort Drum, the 1048th Medium Transportation Company provided a flatbed truck to move them to the training area. Once there, the engineers assembled the sections and built the rest of the facility, adding electricity and plumbing.

“They love it out here,” said Caso. “This is exactly what they signed up to do.”

Soldiers from the 192nd Military Police Battalion used the facility to secure simulated detainees captured during training. The engineers disassembled the facility to take it back to Connecticut, where it will be rebuilt and used for further training.



Related Articles
Connecticut Army National Guard Spc. Ashley Hornung, left, a combat medic specialist assigned to the 141st Medical Company (Ground Ambulance), helps Connecticut Army National Guard Spc. Dyamanni Vasquez, right, military police assigned to the 143rd Regional Support Group, stand up during a mass casualty exercise at Fort Drum, New York, Aug. 13, 2023.
Connecticut Army Guard Medics Conduct Mass Casualty Training
By Sgt. Matthew Lucibello, | Sept. 14, 2023
FORT DRUM, N.Y. - Medics from the Connecticut Army National Guard’s 143rd Regional Support Group trained for a mass casualty event at Fort Drum.From Aug. 11-13, medics attached to units across the 143rd Regional Support...

A bridge erection boat operated by Soldiers from the 250th Engineer Company (Multi-Role Bridge Company), 192nd Engineer Battalion, Connecticut Army National Guard, pulls away from a section of an improved ribbon bridge at Fort Drum, New York, Aug. 10, 2023.
Connecticut Guard Engineers Build Bridge in Annual Training
By Sgt. Matthew Lucibello, | Sept. 1, 2023
FORT DRUM, N.Y. - In combat, having the freedom to maneuver can directly affect the outcome of a battle. Rough terrain, or in this case, a deep, wide river with a powerful current, can impede or even stop Soldiers in their...

U.S. Army Sgt. Kevin O'Connell and his working dog, Misha, walk across the tarmac of Bradley Air National Guard Base in East Granby, Conn., to investigate a C-130H aircraft as part of a training exercise Aug. 29, 2023. This training was designed to help handlers and their K-9 step outside their comfort zone, train in an unfamiliar environment, and build rapport with their sister service.
Connecticut Guard K-9s Test Their Skills in Plane Search
By Timothy Koster, | Aug. 31, 2023
EAST GRANBY, Conn. - The Connecticut National Guard’s 928th Military Working Dog Detachment searched a 103rd Airlift Wing C-130H aircraft Aug. 29 in an exercise that tested the capabilities of its K-9 service dogs. In the...